22/45 feeding issues

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Thu Jul 27, 2017 1:19 pm

Been having this issue since getting the Tac Sol upper. At least once a mag a round will go nose up into the top of the chamber.

Sent from my iPhone using Tapatalk Pro

Post by **Niceguy** » Thu Jul 27, 2017 1:33 pm

What a piece of shit... I'll give you $100 for it? haha

Post by **Rem700** » Thu Jul 27, 2017 1:50 pm

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Thu Jul 27, 2017 1:56 pm

Haha...no

Sent from my iPhone using Tapatalk Pro

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Thu Jul 27, 2017 1:58 pm

I don't remember ever having this issue with the factory upper. This one fits looser than the factory, not sure if that could be part of it. Need to take the old upper with me next time I go and try both to be sure

Sent from my iPhone using Tapatalk Pro

Post by **rustynuts** » Thu Jul 27, 2017 2:01 pm

$150. Final offer.

Post by **Toddstang** » Thu Jul 27, 2017 5:07 pm

Polish feed ramp.

Post by **Niceguy** » Thu Jul 27, 2017 7:48 pm

ssracer wrote:I don't remember ever having this issue with the factory upper. This one fits looser than the factory, not sure if that could be part of it. Need to take the old upper with me next time I go and try both to be sure

Sent from my iPhone using Tapatalk Pro

YouTube how to tighten these up. There are lots of videos. I think that was the problem with mine before I got it. I'm telling you, it needs to visit Coach for a little while...haha

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Thu Jul 27, 2017 7:56 pm

Niceguy wrote:
ssracer wrote:I don't remember ever having this issue with the factory upper. This one fits looser than the factory, not sure if that could be part of it. Need to take the old upper with me next time I go and try both to be sure

Sent from my iPhone using Tapatalk Pro
YouTube how to tighten these up. There are lots of videos. I think that was the problem with mine before I got it. I'm telling you, it needs to visit Coach for a little while...haha

I'll do that...the YouTube part. The coach part if he wants to..lol

Sent from my iPad using Tapatalk Pro

Post by **nemo** » Thu Jul 27, 2017 8:53 pm

I had to "fit" a barrel for a friend, just bang the engaging lug till it fits tight. Polishing and contouring of the ramp is standard affair.

Post by **guncrank1** » Fri Jul 28, 2017 10:37 am

Use a nice 40 grit stone when polishing that ramp

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Fri Jul 28, 2017 11:01 am

I'm not sure it's the ramp that's the problem. The bolt is ending up over the cartridge

Sent from my iPhone using Tapatalk Pro

Post by **Toddstang** » Fri Jul 28, 2017 11:02 am

Barrel alignment is off.

Post by **Niceguy** » Fri Jul 28, 2017 11:14 am

That sounds TERRIBLE! $105?

Post by **rustynuts** » Fri Jul 28, 2017 1:21 pm

Niceguy wrote:That sounds TERRIBLE! $105?

Dude, I already offered one fifty. Quit tryin' to undercut me!

Post by **Niceguy** » Fri Jul 28, 2017 1:24 pm

rustynuts wrote:
Niceguy wrote:That sounds TERRIBLE! $105?
Dude, I already offered one fifty. Quit tryin' to undercut me!

Yeah, but that's nuts. This thing has SERIOUS issues! If this gun had a name, it would be Toecutter...

Post by **Dave1965** » Fri Jul 28, 2017 1:28 pm

send it back and be done with it

unless its your only gun....

yeah I said that

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Fri Jul 28, 2017 1:35 pm

Dave1965 wrote:send it back and be done with it

unless its your only gun....

yeah I said that

Lol...I bought the upper on consignment. I'll get it figured out.

Sent from my iPhone using Tapatalk Pro

Post by **Niceguy** » Fri Jul 28, 2017 5:28 pm

I bet getting the upper fit tight and some more rounds through it will take care of it.

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Thu Aug 17, 2017 8:21 pm

Took it back to the range with me today when I went to shoot the VP9. Only shot a few mags through it but confirmed that if I held the upper down tight to the frame it would work fine. If I pushed the upper up away from the frame it would fail.

Came home and poured out a PBR (not drinking right now so there were no empty cans) and started cutting it up. Ended up with a tiny piece folded over so there are three layers. Put a little bend in it and epoxied it onto the bottom of the slot in the upper that the lug on the front of the lower engages. Took a couple of tries to get it right. Let it sit for an hour and now it's plenty tight when assembled. Just need to go shoot it again now

Sent from my iPhone using Tapatalk Pro

Post by **nemo** » Fri Aug 18, 2017 3:07 pm

I used a small brass hammer and tapped the lug till I got a tight fit. There is a YT video out there that shows how.

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Fri Aug 18, 2017 3:16 pm

nemo wrote:I used a small brass hammer and tapped the lug till I got a tight fit. There is a YT video out there that shows how.

I wanted to avoid modifying the frame so that the original upper could still be used on it. Don't know why, just wanted to keep it able to

Sent from my iPhone using Tapatalk Pro

Kentucky Armory Club

22/45 feeding issues

22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Re: 22/45 feeding issues

Login • Register