Mike wrote:Wow! I'm impressed with the build!! Have no idea what color to paint it. I'd likely do a light grey or tan. Neutral.
What are you going to do on the floor? Maybe those soft cushioned floor tiles? Pretty cheap for a nice floor. Or you could roll some cheap carpet but keep it short so you don't lose parts and springs in it.
So is there a build thread on this? I like the way you reinforced the ceiling. I like it all actually.
This is now a build thread.
In September I had the blocks put in. The blocks are filled with concrete and rebar.
Then the door came in and picked that up into place.
The ceiling is 1/4" plate cut 2' wide. I welded 4" flat bar to the top and bolted it to the adjoining plate. I used self tapping bolts so there are not any nuts on the outside.
The walls are covered with Akro Mills louvered panels. I have a ton of Akro Mills bins and some hangers from
https://www.secureitgunstorage.com.
The network stack has my Swann NVR, Cisco 2504 wireless router, Cisco 3750x switch, Hue bridge, Smart Things hub, and UPS.