Opinions
- WLJ
- KAC Member
- Posts: 30880
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Opinions
Unless it's got some sort of sentimental value just stop the what ammo guessing game for a POS and save it for a gun buy back. You might walk away with $100 or more. It's unsafe to shoot anyway IMHO.
Or keep it for a display piece.
Or keep it for a display piece.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
- Gunsmokin
- KAC Member
- Posts: 5076
- Joined: Wed Jul 25, 2012 9:11 pm
- Location: Louisville
- Has liked: 1 time
- Been liked: 20 times
Re: Opinions
38. 39. Whatever it takes.guncrank1 wrote:.38 bigger than .32Niceguy wrote:I have a .38 S&W round and it's pretty loose in the cylinder. Doesn't fall through but it's close. That's why I'm thinking maybe .32 S&W.
jackalo626 wrote:Skibble dee dibbledy
-
- Global Mod
- Posts: 12053
- Joined: Sat Mar 03, 2012 8:50 pm
- Location: Louisville
- Has liked: 20 times
- Been liked: 22 times
- WLJ
- KAC Member
- Posts: 30880
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Opinions
https://www.gunpartscorp.com/forum/Guns ... 235523.htm
Jeb, Bill Goforth's book on IJ firearms shows 3 guns marked US REVOLVER CO. Two of them are top-breaks. The first is called: US Revolver Co Automatic Hammer Model 1910-1935. There ar two frame sizes large and small and it was made in calibers .22RF...32 S&W and .38 S&W
The second is called US Revolver Co Automatic Hammerless Model 1910-1935, Again, two frame sizes..large and small with the small being a .32 S&W and the large a .38 S&W
The thrid is called the US Revolver Co Double Action 1911-1935, made in 2 frame sizesd..larege and small....except there is a bit of confusion in that when Bill listed the chamberings...this is what he posted.
Frame size Caliber Cylinder capacity Weight W/ standard bbl OAL w/standard bbl
Small .22RF 7 10 1/2 OZ 6"
MEDIUM .32 S&W 5 12 OZ 6 1/8"
Large .32 S&W Long 6 17 OZ 6 3/4"
Large .38 S&W 5 17 OZ 6 3/4"
That says 3 frame sizes to me,but the text says only 2. The point is that this may affect the parts availabe and the ones that fit. BTW, for those that don't know "Automatic" in this case refers to cartridge case extraction.
In the catalog section of Bill's book, there is a listing for all 3 revolvers....The top-breaks appear to be a neavier framed and barreled gun, while the solid frame appears to be more like a typical blank firing handgun in that the cylinder rod is unprotected and the barrel is thin in appearence. The picture shows an unfluted cylinder
That said, I think your gun..if it is the solid frame model is listed by GPC as: Model 1900 which listes the cals .22,.32 and .38 and the notation reads: Most parts available for all other model Iver Johnson and U.S. Revolvers. nd a statement saying that you must stae caliber and...if possible...include a sketch of the needed parts However...the Illustrated Parts Breakdown shows two hammers and both have FP mounted on them One is for CF and the other RF. There is no FP bushing shown or listed. However, the listing for the Hammerless version show a FP #524310 and a part called: "Firing Pin Nut" .32 and .38 cal. #524370
There is also a IPB and parts list for the OLD MODEL SAFETY HAMMER, .22 and .32 small frame and .38 Large Frame which carries the ID note on US Revolvers. Neither illustrated hammer show a mounted FP. but the parts list shows a FP for a .38 to be #524310A and a Firing Pin Nut to be #524370A. All this has some beatring on your parts search in that there are several such named firearms and that can lead to some confusion when you try to ascertain if the seller has the Exact part you need. Sadly I have no other specific source for IJ parts...but "RON" is an H&R specialists and,often, such persons often become involved with other brands of similar firearms he may have what you need or he may know who does.Check at:E-Mail to: mailto:ronmar68@comcast.net
and try our old friends at mailto:armatt@aol.com
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
- WLJ
- KAC Member
- Posts: 30880
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Opinions
BTW: You can ignore with I typed in post #28 if cost of repair is cheap enough.
I plead permanent insanity
I plead permanent insanity
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
- Niceguy
- KAC Member
- Posts: 14227
- Joined: Thu Apr 05, 2012 2:57 pm
- Location: Smithfield Ky
- Has liked: 337 times
- Been liked: 92 times
Re: Opinions
My managers neighbor had them and was curious. They were stuff of her dad's that her mom gave her. She said no sentimental value to her, but she is running it by Genesys in Crestwood to see how cheap it could be made safe. I told her I would guess about the value of the gun in perfect shape, but really had no idea. She said if it's more than $50 she would just sell them to me super cheap. I would take the firing pin out and use it as a conversation piece, because no way in hell would I want anyone to shoot it. I think break action revolvers are just cool as shit.
-
- KAC Member
- Posts: 6387
- Joined: Sat Mar 03, 2012 8:48 pm
- Location: Metro Louisville
- Has liked: 3 times
- Been liked: 15 times
- Contact:
Re: Opinions
Really?Niceguy wrote:My managers neighbor had them and was curious. They were stuff of her dad's that her mom gave her. She said no sentimental value to her, but she is running it by Genesys in Crestwood to see how cheap it could be made safe. I told her I would guess about the value of the gun in perfect shape, but really had no idea. She said if it's more than $50 she would just sell them to me super cheap. I would take the firing pin out and use it as a conversation piece, because no way in hell would I want anyone to shoot it. I think break action revolvers are just cool as shit.
Those revolvers are perfectly safe to fire if repaired properly