You should probably do some grinding on the lower to remove any burrs that could be causing a problem.iron369 wrote:The hammer spring was in its correct place.
Anti-walk pins
- iron369
- KAC Member
- Posts: 5321
- Joined: Mon Feb 17, 2014 11:43 am
- Location: Valley Station
- Has liked: 84 times
- Been liked: 100 times
Re: Anti-walk pins
Already had that done[FACE WITH TEARS OF JOY]Dave1965 wrote:You should probably do some grinding on the lower to remove any burrs that could be causing a problem.iron369 wrote:The hammer spring was in its correct place.
Using Tapatalk
-
- KAC Member
- Posts: 171
- Joined: Thu Mar 22, 2012 5:43 pm
- Location: Richmond
- Has liked: 0
- Been liked: 0
- Contact:
Re: Anti-walk pins
I did a lot of research before I built my 9mm AR. The issue with the pins is not only walking , but rotation. The KNS pins are anti-rotational and anti- walk. The 9mm cycles so fast it can rotate the pins.