Need cheap exhaust

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Wed Mar 21, 2012 4:55 pm

The exhaust on my truck leaks like crazy and it's burning oil, not a good combo. Need a cheap as possible manifold back exhaust install. Anybody got any suggestions?

It's an 88 Silverado RCLB with a 305

Post by **Rem700** » Wed Mar 21, 2012 4:58 pm

Pull a part or grade a

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Wed Mar 21, 2012 5:02 pm

I want a new exhaust, just don't want to pay a lot for one

Post by **Rem700** » Wed Mar 21, 2012 5:04 pm

Gotcha probably not gonna be cheap then, cause manifold back would include a new cat which are usually pricey

Post by **Toddstang** » Wed Mar 21, 2012 5:44 pm

GAP on Poplar Level

Post by **Marcus** » Wed Mar 21, 2012 5:50 pm

Toddstang wrote:GAP on Poplar Level

I'll second.

reverend dreed · Post by **reverend dreed** » Wed Mar 21, 2012 5:53 pm

bring it out to wayno's garage in new haven. he has done sevelral exhaust jobs for me he works much cheaper than the big shops $35 per hr if i remember correctly. any way the exhaust on the crown wic was 150 bucks manifold to tailpipe but i did not need a muffler just the pipe.

Post by **son of liberty** » Wed Mar 21, 2012 6:05 pm

88 burning oil with a leaking exhaust, just how much money you wanna pour in to that thing?

Post by **Rem700** » Wed Mar 21, 2012 6:08 pm

son of liberty wrote:88 burning oil with a leaking exhaust, just how much money you wanna pour in to that thing?

My thoughts as well....just cut it off and dump in some oil once in a while

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Wed Mar 21, 2012 7:38 pm

Just enough to keep it going. It runs fine and I've already fixed everything else. I cut the cat out a while back. I realize that's the crap part because any by the book shop will have to put one back on.

The exhaust is to the point that the fumes get in the cab when sitting still, that's why I want to do it. At least get them all the way to the back...lol

Website · Post by **mtmetzger** » Wed Mar 21, 2012 8:53 pm

If you are ever out in Stanton, there is an excellent place called Joey's Muffler shop. His prices and quality of work are definitely worth the drive, even from Louisville. Plus he will overlook the fact that there is no cat.

Post by **wash** » Wed Mar 21, 2012 9:06 pm

Exhaust on my 96 dodge rusted off last year. No plans to replace. Good luck on the hunt SS!

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Wed Mar 21, 2012 9:44 pm

I used some of that exhaust putty crap on all the joints in it last year and it worked for a while.

Ulterior motive is that this is really the only thing left that makes it anywhere near not safe to drive, and if I can get it good I am going to see about loaning or giving it to the ex so I can sell the damn sante fe that I am still paying for.

Post by **JustShootIt** » Thu Mar 22, 2012 12:39 am

If it's worth the drive to my neck of the woods I got a buddy with a nice shop , lift, welder, pipe bender etc......

He does mechanic work, tires and exhaust stuff on the side........

Know I could get u a good deal.........

Post by **kokopelli** » Sat Mar 24, 2012 8:31 pm

Patriot Auto does some cheap work...

Post by **nogomoto** » Sat Mar 24, 2012 10:02 pm

$100 long tubes from Autoblown, 1 $35 fully welded stainless Thrush Hush muffler, a $10 turn down and a visit to the dude on Hwy 44 between Shep and Mt. Washington in that little shop. I think it's Xpert exaust or something. I know the dude, He does awesome friggen work at a reasonable price.

Kentucky Armory Club