Noooooooooooooooooooooooooooo!!! The precious!

Post by **KYgundude** » Sun Feb 03, 2013 1:29 pm

My favorite is unhappy.
Pac-Lite 22/45 with some Volquartsen inards

I started having a problem where the gun would cycle the round just fine but not actually cock the gun. If I pull the bolt back half an inch or so ( not far enough to eject the round ) and let it slam shut again it will cock and fires. Rinse and repeat on next round. My initial thought was it's too dirty so i gave it a real good cleaning and greasing thinking maybe the slide had too much resistance. Worked for the first 2 mags but by the third mag the problem was back. I'm thinkin g it needs Cranky but thought I'd toss it out for comments first

GUNDUDE MUST HAVE THE PRECIOUS!!

Post by **Winner** » Sun Feb 03, 2013 1:34 pm

Different ammo ??

Post by **WLJ** » Sun Feb 03, 2013 1:35 pm

It's broke and unfixable, give it to me, I'll take it off your hands

:llama:

Post by **Toddinlou** » Sun Feb 03, 2013 1:36 pm

Nemo is somewhat of a wizard with these Rugers. Maybe him or Cranky can chime in with a suggestion but get it right.... If not I'll trade you a $5 Hot And Ready for it.

Post by **jmeister** » Sun Feb 03, 2013 1:40 pm

weak sear spring not resetting the hammer on the sear?

Post by **guncrank1** » Sun Feb 03, 2013 2:49 pm

jmeister wrote:weak sear spring not resetting the hammer on the sear?

Actually could be the problem which is causing hammer to rub on bolt.

The ammo the same

is the recoild spring ok as well as the guide.?

Has the tension changed on the mainspring in it's housing?

Post by **Mike** » Sun Feb 03, 2013 3:34 pm

Looks broken to me

There is no can on it

Post by **KYgundude** » Sun Feb 03, 2013 3:53 pm

guncrank1 wrote:
jmeister wrote:weak sear spring not resetting the hammer on the sear?
Actually could be the problem which is causing hammer to rub on bolt.

The ammo the same

is the recoild spring ok as well as the guide.?

Has the tension changed on the mainspring in it's housing?

Cranky, not even a clue man. I'm not that knowledgeable. Can I bring it over to you sometime this week?
BTW I have used 3 different types of ammo with no difference.

Post by **jackalo626** » Sun Feb 03, 2013 4:47 pm

Get well soon little Ruger.

Post by **guncrank1** » Sun Feb 03, 2013 5:41 pm

KYgundude wrote:
guncrank1 wrote:
jmeister wrote:weak sear spring not resetting the hammer on the sear?
Actually could be the problem which is causing hammer to rub on bolt.

The ammo the same

is the recoild spring ok as well as the guide.?

Has the tension changed on the mainspring in it's housing?
Cranky, not even a clue man. I'm not that knowledgeable. Can I bring it over to you sometime this week?
BTW I have used 3 different types of ammo with no difference.

Yes you may

Post by **guncrank1** » Sun Feb 10, 2013 6:54 pm

Up date
Kygundude gun was not having good trigger return.
Adjusted that to heavier and it works great.
Will post range results later

Post by **KYgundude** » Sun Feb 10, 2013 7:27 pm

guncrank1 wrote:Up date
Kygundude gun was not having good trigger return.
Adjusted that to heavier and it works great.
Will post range results later

Thanks for the update cranky!! I miss her. LOL

Post by **guncrank1** » Sun Feb 10, 2013 9:50 pm

click on to play movie

The last string of ten

Post by **guncrank1** » Sun Feb 10, 2013 9:53 pm

This is second or first string

Click on the pictures for movie

Post by **Wyldman** » Sun Feb 10, 2013 9:59 pm

Once the trigger was adjusted to where we could feel the reset, it ran 50+ consecutive rounds w/o a hiccup. Still a bit too light for my taste, but it should run like a scalded dog, now.

Yes, I was helping Cranky with test firing and video taking.

Post by **guncrank1** » Sun Feb 10, 2013 10:06 pm

Wyldman wrote:Once the trigger was adjusted to where we could feel the reset, it ran 50+ consecutive rounds w/o a hiccup. Still a bit too light for my taste, but it shoulders run like a scalded dog, now.

Yes, I was helping Cranky with test firing and video taking.

Thanks Wyldman good time trying out the carbine and the loosely goosie Pac-Lite
Had a piece of foam or something in it
I have bedded it now.
Now it probley would not work worth a crap :llama:

Post by **KYgundude** » Sun Feb 10, 2013 10:17 pm

So is the precious fixed and ready for pickup? I'm not sure I followed this all.

Post by **Wyldman** » Sun Feb 10, 2013 10:18 pm

Yeah, I get the giggles every time I pulled the trigger on the suppressed MechTech CCU carbine, now. It turned out better than my wildest dreams, especially running those 30 round Kriss mags.

I wish I had taken a pic of you when tried it for the first time, you looked like a cat with canary feathers on his chin!

Post by **guncrank1** » Sun Feb 10, 2013 10:20 pm

KYgundude wrote:So is the precious fixed and ready for pickup? I'm not sure I followed this all.

No

Post by **KYgundude** » Sun Feb 10, 2013 10:20 pm

guncrank1 wrote:
KYgundude wrote:So is the precious fixed and ready for pickup? I'm not sure I followed this all.
No

Ok, Thanks Cranky!

Kentucky Armory Club