Double tapping ar-15
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Double tapping ar-15
I have a freshly assembled lower that is firing twice per trigger pull if you let off slowly. If you let off as fast as possible the trigger catches the hammer and it doesn't fall. It's a mill spec trigger nothing special and a mag tactical lower any thoughts on which may be out of spec
Ky CCDW Instructor
- Dustin
- KAC Member
- Posts: 3150
- Joined: Sun Mar 04, 2012 12:47 pm
- Location: Lost in Space
- Has liked: 4 times
- Been liked: 40 times
Re: Double tapping ar-15
The pin for the hammer ?
"What country can preserve its liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance. Let them take arms." Thomas Jefferson
Re: Double tapping ar-15
It's most likely the trigger, but knowing thier QC... I wouldn't be surprised if it were the lower.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Marcus wrote:KAC, marrying above their league since 2012.
- WLJ
- KAC Member
- Posts: 30628
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Double tapping ar-15
Also check the hammer and sear for burrs that would prevent them from locking
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Re: Double tapping ar-15
Put the firing control group in another lower functioned perfect felt very different pulling the trigger. Measured the distance outside (furthest distance of the two holes for the pins is 1.055 on the functioning lower 1.077 on the one that is dropping the hammer on release.
Ky CCDW Instructor
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Re: Double tapping ar-15
Yep. Wonder if they will warranty it or I'm just sol. I'm pulling all my others out now to see if there good or bad
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Ky CCDW Instructor
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Re: Double tapping ar-15
All other lowers measure 1.058-1.059 left and right side of lower measured. must have not got a good measurement last time on that one.
The one I decided to build first was 1.080 on one side and 1.061 on the other Wtf not even close to square.
Sent from my iPhone using Tapatalk
The one I decided to build first was 1.080 on one side and 1.061 on the other Wtf not even close to square.
Sent from my iPhone using Tapatalk
Ky CCDW Instructor
Re: Double tapping ar-15
Like I mentioned thier QC was and is shit. There is a reason the lowers went from $200 to $40.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Marcus wrote:KAC, marrying above their league since 2012.
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Re: Double tapping ar-15
Yeah I kind of figured there was a reason they were cheap. Hopefully they will stand behind there product I just sent them a detailed email about the issue
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Ky CCDW Instructor
- WLJ
- KAC Member
- Posts: 30628
- Joined: Sat Mar 03, 2012 8:55 pm
- Location: Epsilon Eridani System
- Has liked: 11 times
- Been liked: 110 times
Re: Double tapping ar-15
After doing some google searches on Mag Tactical lowers seems like you're not the only with an out of spec lower from them.
There are criminals among us who are both homicidal and incorrigible. Their parents took a shot at civilizing them and failed. Their school teachers took a shot at them and failed. The odds are overwhelming that government welfare programs and penal institutions took a shot at them and failed. If it ever becomes your turn to take a shot at them, don’t fail.
Re: Double tapping ar-15
I have had my hands on a couple thousand of them. A bunch were pretty damn rough. Wish I still had all the pictures.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Marcus wrote:KAC, marrying above their league since 2012.
-
- KAC Member
- Posts: 800
- Joined: Sat Feb 09, 2013 10:03 pm
- Location: henderson/louisville,ky
- Has liked: 0
- Been liked: 0
Re: Double tapping ar-15
I had been halfway hand picking them when checking out but didnt think I would have to worry about if they could drill the holes in the right spot. No reply yet from the company.....
Ky CCDW Instructor