Ares BCG problems.
- Niceguy
- KAC Member
- Posts: 14212
- Joined: Thu Apr 05, 2012 2:57 pm
- Location: Smithfield Ky
- Has liked: 330 times
- Been liked: 92 times
Ares BCG problems.
I put together a pistol lower and put on a pre assembled upper. Had a new Ares BCG from Aim and it seems to be a problem. I swapped it around in 2 other rifles and this pistol with different CH also. It's the common problem. It sticks in every gun and combo. Are these known to be pos? The CH unlocks and moves 1/4-1/2" and then sticks. Even when not locked down on the lowers you have to shake it and jack around with it to release. Won't release at all when upper and lower is assembled. It definitely could be something I'm doing (still a noob), but don't think so because swapping BCG's, CH between 3 uppers. It's the only part that is always the problem. 3 different Gunfighter CH, 3 uppers and 2 other BCG's all work fine together.
- ssracer
- KAC Member
- Posts: 13713
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 57 times
- Contact:
Re: Ares BCG problems.
That amount of movement it sounds like the lugs on the bolt aren't disengaging from the barrel extension properly. Could be maybe the cam pin hanging up or the bolt head is out of spec. Those are just my guesses.
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Re: Ares BCG problems.
I second this. Always had good customer service from them.CCRBUM wrote:Aim is usually pretty good about making it right the wrong
Sent from somewhere over yonder.
SI JE PUIS
-
- Founding Father
- Posts: 7009
- Joined: Sat Mar 03, 2012 7:40 pm
- Has liked: 3 times
- Been liked: 0
Re: Ares BCG problems.
U sure the gas key is tightened down good?
Had one years ago do this and gas key was loose...
Had one years ago do this and gas key was loose...
"All that is necessary for the triumph of evil is that good men do nothing."(Edmund Burke)
Re: Ares BCG problems.
Aim knows that some of these have problems. There is a thread on arfcom and aim has made it right. Give them a call. Mine works pretty well on my 100% suppressed 300blk. Dirty often and wipes clean.