Colt Lightweight Sporter Carbine
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Colt Lightweight Sporter Carbine
I found this Colt for sale, the price is right but I'm looking for some input. Any opinions on quality? I like fixed carry handle uppers so this one kinda got my attention. I know the stock isn't original but waiting on details about the rest.
- Whootsinator
- Little Butthole
- Posts: 3128
- Joined: Sun Mar 04, 2012 2:04 am
- Location: Northern Kentucky
- Has liked: 0
- Been liked: 0
Re: Colt Lightweight Sporter Carbine
A 16" barrel with carbine length gas isn't the best (assuming the gas port isn't on the small side to accommodate), but also isn't the end of the world. I'd put an H2 or even H3 buffer in it. In my experience it makes an appreciable felt difference.
It's an older Colt. Not much to be said. It should be good. If the price is right and it has the features you want, buy buy buy.
It's an older Colt. Not much to be said. It should be good. If the price is right and it has the features you want, buy buy buy.
"I don't retreat; I kick ass in the other direction."
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
Not sure if I should just find a lower and put my 10.5" Colt back together......
- DDgunslinger
- Posts: 3430
- Joined: Sat Mar 03, 2012 8:10 pm
- Location: Louisville
- Has liked: 0
- Been liked: 0
- Contact:
Re: Colt Lightweight Sporter Carbine
6920, for a $200 difference it's worth the upgrade. Newer parts, flat top upper receiver, and etc. That would be my vote all day.Mexican Kerry wrote:Here's another option, a 6920. The Sporter is $995, the 6920 is $1175 (CAD).
Not sure if I should just find a lower and put my 10.5" Colt back together......
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Colt Lightweight Sporter Carbine
Also some of the older colts have different size trigger pin holes, blocks that don't allow some more modern triggers like the echo and the bolt carrier has that back bottom cut off where it would actuate a full auto sear. Id go with the 6920. If I had $1175 to spend on a AR right now I'd go with a BCM for just a little more or spikes tactical for less.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
SI JE PUIS
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Re: Colt Lightweight Sporter Carbine
FYI the army isn't even buying anymore colts they've switched to FN full autos that are ambi. At least that's what I had in basic and was told it's going army wide eventually.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
SI JE PUIS
- Whootsinator
- Little Butthole
- Posts: 3128
- Joined: Sun Mar 04, 2012 2:04 am
- Location: Northern Kentucky
- Has liked: 0
- Been liked: 0
Re: Colt Lightweight Sporter Carbine
You had M4A1's with ambidextrous controls?
"I don't retreat; I kick ass in the other direction."
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Re: Colt Lightweight Sporter Carbine
yes it had a ambi safety on it and was a FN in full auto instead of burst and I was the second person to ever use it they were brand new the previous cycle before mine.Whootsinator wrote:You had M4A1's with ambidextrous controls?
Sent from my iPhone using Tapatalk
SI JE PUIS
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Colt Lightweight Sporter Carbine
Also had a aimpoint comp m4 which I didnt know the army adopted
Here's a link.
http://www.thefirearmblog.com/blog/2014 ... -contract/
Sent from my iPhone using Tapatalk
Here's a link.
http://www.thefirearmblog.com/blog/2014 ... -contract/
Sent from my iPhone using Tapatalk
SI JE PUIS
- gaston_kalash
- Posts: 867
- Joined: Fri Sep 27, 2013 11:09 pm
- Location: somerset
- Has liked: 0
- Been liked: 0
Re: Colt Lightweight Sporter Carbine
We can start another thread about all the new army stuff if you want like the new hummers and M240L etc I don't want to highjack this thread.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
SI JE PUIS
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
The Spikes and BCM aren't really on my radar, both I'm looking at are used. Prices are relative I guess, in Canada we pay a premium because of importing/dollar exchange/availability.
I like the nostalgia thing with a fixed carry handle, but DD makes a good point. The 6920 would be more versatile with the removeable handle. Plus the twist being 1:7 would make it more friendly for various ammo. Although since I have a HUGE stockpile of 55 gr that may be irrelevant.
Decisions. This is mostly a stop gap measure as my 10.5 Colt is down right now for lack of a lower.
I like the nostalgia thing with a fixed carry handle, but DD makes a good point. The 6920 would be more versatile with the removeable handle. Plus the twist being 1:7 would make it more friendly for various ammo. Although since I have a HUGE stockpile of 55 gr that may be irrelevant.
Decisions. This is mostly a stop gap measure as my 10.5 Colt is down right now for lack of a lower.
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
The owner of the Lightweight dropped the tax from the price so I saved 100 bucks. Went for it, hope it turns out to be a good buy. Probably won't get it til next week.
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
In case anyone's interested in an update:
turns out (as suggested by gk) its got the sear block but the pins seem to be standard size so that's ok. Other than the front pivot which is still the oversized Colt version.
Just need to cut out the block and then its more versatile if I ever decide to/need to change any parts. It also has the cut down carrier to accommodate the block, not the end of the world. It does have a 1/7 barrel, bonus that I didn't know until I got it in my hands.
I replaced the extension tube and stock with a repro 2 position and aluminum stock, mostly because I just prefer it. As you can see its commercial dimension but whatever.
I have this old red dot that came with a bunch of parts I bought so for shits I threw it on. Seems to fit the vintage.....doubt it'll stay on but I'll try it out.
turns out (as suggested by gk) its got the sear block but the pins seem to be standard size so that's ok. Other than the front pivot which is still the oversized Colt version.
Just need to cut out the block and then its more versatile if I ever decide to/need to change any parts. It also has the cut down carrier to accommodate the block, not the end of the world. It does have a 1/7 barrel, bonus that I didn't know until I got it in my hands.
I replaced the extension tube and stock with a repro 2 position and aluminum stock, mostly because I just prefer it. As you can see its commercial dimension but whatever.
I have this old red dot that came with a bunch of parts I bought so for shits I threw it on. Seems to fit the vintage.....doubt it'll stay on but I'll try it out.
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
Looking back on it there's a lot of stuff I didn't know until y'all pointed out differences and I then researched. If I had listened and done the research BEFORE, I may have gone with the 6920. Hopefully it is a decent shooter, haven't had time to get out with it and its been bitter cold lately anyway.
- DDgunslinger
- Posts: 3430
- Joined: Sat Mar 03, 2012 8:10 pm
- Location: Louisville
- Has liked: 0
- Been liked: 0
- Contact:
Re: Colt Lightweight Sporter Carbine
Congrats on the pick up, live and learn. I hope you enjoy the new rifle.
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
I finally got out to shoot a week or so ago and I broke it. First time out with it and I put about 40 rds downrange at 100 yds. Repro 2 position buffer tube let me down. Stock collapsed when I fired, muzzle went up and my shot went over the berm (right over the police range beyond me). Got a good smack on the face when it happened.
I tried one more shot, no problem. One more, stock collapsed again. Took it off, saw the stock pin had sheared material off the buffer tube. After this, a light slap on the butt collapsed the stock.
Turns out the pin was only engaging about 1/16". I've since ordered a replacement buffer tube, a like new surplus C8 2 position piece I found. No more unknown repro parts for me, for all I know it might have been an airsoft stock.
I tried one more shot, no problem. One more, stock collapsed again. Took it off, saw the stock pin had sheared material off the buffer tube. After this, a light slap on the butt collapsed the stock.
Turns out the pin was only engaging about 1/16". I've since ordered a replacement buffer tube, a like new surplus C8 2 position piece I found. No more unknown repro parts for me, for all I know it might have been an airsoft stock.
-
- KAC Member
- Posts: 1820
- Joined: Sat Mar 10, 2012 1:32 am
- Location: Saskatoon
- Has liked: 0
- Been liked: 12 times
Re: Colt Lightweight Sporter Carbine
Put a CTR stock on it today just to get it working again and my son and I went to the range. Pretty wet but still had a good time. The 16" worked great, he put about 300 rds through it. I put about the same through my 10.5" but it seemed a bit fussier and I had a few ftf issues.
Using LAR mags as rifle mags have a 5 rd limit here....
Using LAR mags as rifle mags have a 5 rd limit here....