Kentucky Armory Club

Posted: **Mon Jan 04, 2016 10:41 pm**

Marcus wrote:Saw some of gunsmokin's stuff in there too.

Looky, no touchy.

Posted: **Mon Jan 04, 2016 10:50 pm**

Gunsmokin wrote:
Marcus wrote:Saw some of gunsmokin's stuff in there too.
Looky, no touchy.

Touchy all the time

Posted: **Mon Jan 04, 2016 10:51 pm**

guncrank1 wrote:
Gunsmokin wrote:
Marcus wrote:Saw some of gunsmokin's stuff in there too.
Looky, no touchy.

Touchy all the time

Hence the cranky juice

Posted: **Tue Jan 05, 2016 12:12 am**

Marcus wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...

ssracer wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...
seriously? Damn.

Niceguy wrote:
ssracer wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...
seriously? Damn.
No shit...That's what I said! Marcus said they were there when he was there earlier.

Gunsmokin wrote:
ssracer wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...
seriously? Damn.
Yeah, Damn!
I just happened to be there for something else.

So I scratched johnny's and then picked mine up.

Nice...Saves me the trouble of those menacing first scratches...haha

Posted: **Tue Jan 05, 2016 12:14 am**

Gunsmokin wrote:JP Enterprises 10.5" 9mm Barrel - 1:10 - 12/x36

Manufacturer: New Frontier Armory
Model: 16″ Premium SOCOM profile 9mm AR barrel
Caliber: 9mm
Twist Rate: 1:10
Thread Pitch: 1/2 x 36
Finish: Black Nitride

7.5" Wilson Arms Moly
Profile - Heavy Barrel
Chamber - 9MM
Barrel Thread - 1/2 x36
Barrel Twist - 1x10

7.5" Nitride
Profile - Lighter Profile
Chamber - 9MM
Barrel Thread - 1/2 x36
Barrel Twist - 1x10
Barrel Steel - Chrome Moly Steel

9MM THREADED BARREL
Yankee Hill
Chambered for the 9X19mm cartridge with a 1:14" 6 groove twist. Made from 4140 steel heat treated to RC 25-32. Features a fully machined one-piece barrel extension. Muzzle threads are 1/2"-36. Our barrels are designed to fit a 0.750" gas block. NO CHROME

I'm not sure what I want. I'm thinking 8.5-10.5" barrel, just seems like a good size for 9mm. It could come down to what I can find in 1/2x28 though...haha

Posted: **Tue Jan 05, 2016 12:16 am**

jmeister wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...
Dang, I still need to get payment to you too... and apparently figure out how/when to meet Cranky.

Not a problem... I never expected them that fast either.
To bad it's not any other part of it, I could get it and meet you somewhere. A lower...Not as easy. haha

Posted: **Tue Jan 05, 2016 12:18 am**

Niceguy wrote:
jmeister wrote:
Niceguy wrote:Our lowers are at Cranky's today apparently also...
Dang, I still need to get payment to you too... and apparently figure out how/when to meet Cranky.
Not a problem... I never expected them that fast either.

He didn't either. I happened to ask him a question about building a 9mm upper and he said, "Oh, those are in my car."

Posted: **Tue Jan 05, 2016 12:19 am**

Hahaha

Posted: **Tue Jan 05, 2016 11:00 am**

Fudge wrote:So what uppers and BCGs will work with the Spartan lower?

Will the PSA upper work with them?

Sent from my iPhone using Tapatalk

No idea... This seem like they may be even more pain in the asses than AR10's...haha

Posted: **Tue Jan 05, 2016 1:15 pm**

I think any ramped bolt will work otherwise you need a special hammer to use the standard bolt. Not sure about the PSA upper, need to research that some more. My barrel and kak stabilizer to do a pistol build has shipped already. Going to be a slow build for the remainder.

Posted: **Tue Jan 05, 2016 1:20 pm**

I have everything for lower now, including kak tube and Sig brace. Just need upper.

Posted: **Fri Jan 08, 2016 12:21 am**

Submitted form 1 for the 9mm lower and for my 300BLK lower for making SBR's tonight!!

Posted: **Mon Jan 11, 2016 6:45 pm**

Just got the email that NFA 9mm slick side LRBHO uppers are in stock
https://newfrontierarmory.com/shop/c-9- ... per-lrbho/

Posted: **Tue Jan 12, 2016 9:01 am**

This! ^^^^^ haha

Posted: **Mon Jan 18, 2016 9:04 am**

Fudge wrote:Got a 7.5 barrel, slickside upper and 9" keymod on route with an lpk.

Sent from my iPhone using Tapatalk

Does it have the stupid looking long ejection port or a smaller 9mm size hole?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Posted: **Mon Jan 18, 2016 9:51 am**

That sucks. These things are kind of pain in the ass to find parts for.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Posted: **Mon Jan 18, 2016 3:16 pm**

Damn...I could see it happen real easy though.
So many barrels with that supid 1/2x36 thread. What a pain in the ass... A match grade 8-10" barrel would be sweet but every one I've found were 1/2x36. I want a upper that looks like it was made for a 9mm and that seems like it's going to be a problem also. Most have a large enough opening for 50cal...haha

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Posted: **Mon Jan 18, 2016 4:04 pm**

ssracer wrote:
Niceguy wrote:I don't like the looks of the TP-9 at all. Looks wise I like the Sig over the CZ. I love that they can be made full auto. Can you legally own either in full auto with a tax stamp?
you can't legally own any full auto made after 1986 unless you are a manufacturer or class three dealer

That's not what the news tells me.

Sent from my iPhone using Tapatalk

Posted: **Mon Jan 18, 2016 5:52 pm**

http://www.gorillamachining.com/AR-15-9 ... _c_92.html
These have 1/2"X28 thread and a pretty good price.

Posted: **Mon Jan 18, 2016 6:25 pm**

Gunsmokin wrote:http://www.gorillamachining.com/AR-15-9 ... _c_92.html
These have 1/2"X28 thread and a pretty good price.

They used to be tactical ambush... buyer beware

Posted: **Mon Jan 18, 2016 6:32 pm**

Noted. Thanks.

Posted: **Mon Jan 18, 2016 6:38 pm**

This...^^^

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Posted: **Thu Jan 28, 2016 9:06 am**

jmeister wrote:
Gunsmokin wrote:http://www.gorillamachining.com/AR-15-9 ... _c_92.html
These have 1/2"X28 thread and a pretty good price.
They used to be tactical ambush... buyer beware

What's the story on Tactical Ambush?
I'm always leery of companies that keep changing their name.
ie: Vulcan --> Heese --> Blackthorne --> Velocity Firearms?

Posted: **Thu Jan 28, 2016 10:04 am**

Fudge wrote:Getting there.....

ImageUploadedByTapatalk1453989725.434282.jpg

ImageUploadedByTapatalk1453989739.891586.jpg

Sent from my iPhone using Tapatalk

Looks awesome other than the 5.56 ejection port. They are hard to find with the smaller port though.

Posted: **Thu Jan 28, 2016 10:08 am**

I end up having to go with that, but don't like the looks of it. Just personal taste though. I figure as expensive as these damn things are I might as well make it the way I want it...

Kentucky Armory Club

9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR

Re: 9mm SBR