Double Barrel 1911...WTF

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Sun Mar 11, 2012 8:05 pm

This looks like something that would come out of a discovery channel gun show....

[youtube]BM-DGaNmtA0[/youtube]

Post by **Marcus** » Sun Mar 11, 2012 8:12 pm

That is undoubtedly one of the stupidest things I've seen.

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Sun Mar 11, 2012 8:16 pm

I concur

Post by **CESTILL345** » Sun Mar 11, 2012 8:30 pm

yea what you all said WTF !!!!!

Post by **Geno** » Sun Mar 11, 2012 9:12 pm

Red Jacket? LOL

Post by **kyswede** » Sun Mar 11, 2012 9:15 pm

Easy to do double-taps though. lol

Post by **Mexican Kerry** » Sun Mar 11, 2012 10:08 pm

I feel stupid for even watching that video. Not as practical as simply carrying two pistols haha. At least then you could theoretically engage multiple targets. Reminds me of that retarded o/u .410 1911 that popped up a while back.

Post by **WLJ** » Sun Mar 11, 2012 10:10 pm

Yea, yea
You all say it's stupid, dumb and whatever

But I bet you're searching the internet right now for where you can buy one.

:llama:

Post by **guncrank1** » Mon Mar 12, 2012 12:25 pm

Marcus wrote:That is undoubtedly one of the stupidest things I've seen.

Yes agreed

drwhite · Post by **drwhite** » Mon Mar 12, 2012 2:08 pm

Ya know, I too think it is stupid, but it is unique. I would like to have one just to have it. I know it isn't practical and I wouldn't carry it but the odd and rare things are so interesting.

I came here to post this too.

Post by **WLJ** » Mon Mar 12, 2012 3:19 pm

http://www.thefirearmblog.com/blog/2012 ... rrel-1911/

Arsenal Double Barrel 1911

Arsenal Firearms Second Century Model 2011 is a double barrel 1911 pistol. Well, I say double barrel but its more like two 1911s welded together.

The AF2011-A1 Double Barrel Pistol comes actually as the very first industrial double barrel semiautomatic pistol of all times. The original idea came about ten years back to Swiss armourer Vivian Mueller, who at the time experienced cutting and welding together multiple parts of the famous Sig P210: the result was a long slide, double barrel 9mm, highly decorated collector piece, which indeed shot very well.

Our idea took the challenge further: to commemorate the legendary Colt 1911-A1 in the Centenary by making a true industrial market-ready double barrel .45 caliber pistol. We achieved success in the brief span of 6 months, after intense and round-the-clock 3D designing, stereolithographic modeling and parts machining.

The gun can be handled by any shooter able to shoot with a .45 Acp and it is not only very pleasing, but very accurate and great fun. The AF2011-A1 holds amazing and surprising target performance for the shooter: in fact, it will group all the 8 double .45 caliber rounds (16 bullets) held in the duplex, single columns magazines, in a target of the size of an orange at 15 yards and of a water melon at 25.

The stopping power of the AF2011-A1 is tremendous: 2 bullets for a total of 460 Grains weight impacting at 1 to 2 inches apart (depending on the distance of the target) will knock down a bull, while the whole 18 bullets, for a payload exceeding 4000 Grains, can be delivered to the target in about 3 seconds.

The AF2011-A1 obviously features a number of very special parts, such as the single slide, the single frame, the single spur double hammer, the single grip safety, the single body double mainspring housing and the single double cavity magazine floor plate, the long and double magazine latch, the special barrel bushings and the hold open lever and side lever safety with long shafts: but the most interesting feature of the new pistol which we strived to keep during the development of the project, is the interchangeability of most internal parts, which come as standard 1911 replacement parts. These include the firing pins, the firing pins plates, the sears groups, the triple springs, the inner parts of the mainspring housings, the recoil springs and recoil springs rods, the magazine bodies and inner parts, the sights (including after market adjustable sights) the grips and grips screws and bushings.

The AF2011-A1 ("Twenty Eleven" for aficionados) can be ordered either with 2 independent triggers and one sear group (left or right, with user-interchangeability for right or left operations) or with 2 triggers permanently joined and the choice of 1 or 2 sear groups. The AF2011-A1 is available in mirror finish Deep Blue or with a 3400 Vickers surface hardness White Ash Nitrite coating.

The model with two triggers would be legal in the United States but the model with one trigger would be considered a machine gun (two rounds fired in one trigger pull). A version with one trigger that alternates between each hammer would be a lot more interesting in my opinion

g19 · Post by **g19** » Mon Mar 12, 2012 9:13 pm

This is super pointless and hella stupid looking.

Post by **CatMostFeared** » Tue Mar 13, 2012 6:59 am

I think it's cool and I want one
Just think if you had 2 of them
4 45s at once

Sent from my iPhone using Tapatalk it spells what it wants

Post by **SpookyPistolero** » Mon Mar 19, 2012 9:14 pm

Every time someone watches that video, an angel loses its wings.

http://www.youtube.com/user/ssracer02 · Post by **ssracer** » Mon Mar 19, 2012 9:59 pm

HAHAHAHAHAHAHAHAHAHA.....

I just googled "John Moses Browning facepalm" looking for a picture of him to post and an image of this gun came up on the first row

Post by **kokopelli** » Wed Mar 21, 2012 12:50 pm

http://www.arsenalfirearms.com/products ... rel-pistol

this is a Steven Segal movie gun for sure!!

Kentucky Armory Club