Page 1 of 1

Winchester 94 AE

Posted: Sun Sep 08, 2019 10:28 am
by RedRocker
Help, what do I have?
I recently acquired this pretty lever gun and I’m struggling with determining whether it’s a Ranger Compact, a Trapper, or something else.

Here’s some specs:
16” barrel, 30-30
Cross bolt safety
34.25 overall length
13.5 length of pull
Does NOT have a saddle ring

My best internet investigation led me to the following information:

OAL and LOP suggests it’s a Trapper
Trapper’s have a saddle ring, mine doesn’t
The only other 16” 94 I’ve found is the Ranger Compact
Ranger Compact has a 12.5” LOP and 33.25” OAL

Can’t find anything similar on gun broker, KyGunCo, or Buds for comparison.

The closest SN reference suggests my 94 was manufactured in or around 1992.

Here’s a few pics.

IMG_1299.JPG
IMG_1300.JPG
IMG_1301.JPG





Sent from my iPhone using Tapatalk

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 11:09 am
by kokopelli
A lot of people remove the saddle rings...

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 11:23 am
by Niceguy
kokopelli wrote:A lot of people remove the saddle rings...
My first thought also. But if they did. The removed the pin that holds it also.

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 11:38 am
by RedRocker
The person I got it from says it’s a Ranger Compact. I’d still like confirmation tho.


Sent from my iPhone using Tapatalk

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 6:39 pm
by jollyrodgers
its purty

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 6:42 pm
by Geno
Not sure about Ranger Compact, but cooler than a cat with 2 tails. Nice get!

Re: Winchester 94 AE

Posted: Sun Sep 08, 2019 10:55 pm
by Geno
On further research, the Ranger Compact had the tang safety. The crossbolt AE puts it as a carbine 20" barrel probably cut down to 16 1/4" after market. I've had 2 leverguns cut down by Cranky in the past. One a 30/30 another in 45/70. Both look and perform wonderfully. Check out the crown closely, should be rounded outside and inside to the bore. Still an awesome cowboy assault rifle! Made 1992-2002. Geno

Re: Winchester 94 AE

Posted: Mon Sep 09, 2019 12:54 pm
by kokopelli
Head over to the lever guns forum, they know everything!

https://www.levergunscommunity.org/

Re: Winchester 94 AE

Posted: Mon Sep 09, 2019 4:11 pm
by RedRocker
Geno wrote:On further research, the Ranger Compact had the tang safety. The crossbolt AE puts it as a carbine 20" barrel probably cut down to 16 1/4" after market. I've had 2 leverguns cut down by Cranky in the past. One a 30/30 another in 45/70. Both look and perform wonderfully. Check out the crown closely, should be rounded outside and inside to the bore. Still an awesome cowboy assault rifle! Made 1992-2002. Geno
Here’s the crown. Looks rounded to me.
IMG_1315.JPG

Sent from my iPhone using Tapatalk

Re: Winchester 94 AE

Posted: Mon Sep 09, 2019 8:32 pm
by Geno
Looks like a factory crown. You have a Unicorn!

Re: Winchester 94 AE

Posted: Mon Sep 09, 2019 10:56 pm
by RedRocker
Hmmm, maybe it was a trapper all along.
IMG_1325.JPG

Sent from my iPhone using Tapatalk