G19 IWB

Post by **Bama** » Thu Jan 01, 2015 11:29 am

Finally finished up the holster design for the G19. All that is left is to find someone local with one to test fit. Once that is done, these will be available. As always this feature adjustable cant, retention, and ride height. $28.50 shipped for all KAC members.

Post by **Pitbullcrazyinky** » Thu Jan 01, 2015 1:06 pm

Interested in one

Post by **Bama** » Thu Jan 01, 2015 5:59 pm

Hopefully I can test fit soon. May stop by LGS

richief · Post by **richief** » Thu Jan 01, 2015 8:46 pm

Any chance you could be at London flea market Sunday morn, I'll buy one to try out.

Post by **Bama** » Thu Jan 01, 2015 9:12 pm

richief wrote:Any chance you could be at London flea market Sunday morn, I'll buy one to try out.

What time? I'm in church until 12

richief · Post by **richief** » Fri Jan 02, 2015 1:26 am

I'll pm you my cell#, be great if you could meet up after church. thanks

Post by **Bama** » Sun Jan 04, 2015 12:31 pm

Just met up with Rich, the g19 fit like a glove. Holster now available for $28.50 shipped or $25 in person.
Didn't get any pictures of the gun in holster, maybe Rich will post some if he would like. Thanks for meeting with me today.

richief · Post by **richief** » Sun Jan 04, 2015 9:44 pm

Hey Thank you Dan! Fit and finish is awesome, my Raven has nothing on these. Fit is great I loosened adjusters a bit because I wasn't wearing a belt, just drawstring sweats. Now I can reholster with an IWB, in drawstring pants/shorts, I'm pretty sure I can retire the cordura nylon iwb I used for that kind of attire, and gain the reholstering ability I didn't have. Running draw and fire drills will be alot less tedious and time consuming.

Post by **Bama** » Sun Jan 04, 2015 9:46 pm

Thanks for the pictures!!

Post by **Bama** » Mon Jan 12, 2015 8:31 pm

Twins!!!!!

Post by **Pitbullcrazyinky** » Sat Jan 17, 2015 3:42 pm

Got mine today. I really like these.

Post by **Bama** » Sat Jan 17, 2015 4:27 pm

Thanks pitbull. Let me know if you have questions, problems, or requests for other holsters

Post by **Bama** » Sun Jan 25, 2015 8:13 pm

Here is one cut down for a 26, test fitting this weekend hopefully. Features dual soft loops. I went ahead and added 2 additional holes for the loops so the user can adjust ride height to better fit them.

Post by **jackalo626** » Sun Jan 25, 2015 10:34 pm

If you keep the end open then all Glocks of that caliber will fit, protruding the slide past the opening of course but would work non the less.

Post by **Bama** » Sun Jan 25, 2015 10:47 pm

jackalo626 wrote:If you keep the end open then all Glocks of that caliber will fit, protruding the slide past the opening of course but would work non the less.

Very true. Some other holster makers have reported that the g26 will not work as well in a 19/17 holster because of the disassembly tabs being placed slightly different, and others have reported no issue.

Post by **jackalo626** » Sun Jan 25, 2015 10:48 pm

Bama wrote:
jackalo626 wrote:If you keep the end open then all Glocks of that caliber will fit, protruding the slide past the opening of course but would work non the less.
Very true. Some other holster makers have reported that the g26 will not work as well in a 19/17 holster because of the disassembly tabs being placed slightly different, and others have reported no issue.

Most of the tension is in the trigger guard so it should be fine. Nice prices and very cool about your offer to SeymourSkinner.

Post by **Bama** » Sun Jan 25, 2015 10:51 pm

jackalo626 wrote:
Bama wrote:
jackalo626 wrote:If you keep the end open then all Glocks of that caliber will fit, protruding the slide past the opening of course but would work non the less.
Very true. Some other holster makers have reported that the g26 will not work as well in a 19/17 holster because of the disassembly tabs being placed slightly different, and others have reported no issue.
Most of the tension is in the trigger guard so it should be fine. Nice prices and very cool about your offer to SeymourSkinner.

Thanks Jack!

Post by **RecoilSensitive** » Sat Feb 14, 2015 6:36 am

So now you could do this glock 17 with tlr1?

Post by **Bama** » Sat Feb 14, 2015 9:33 am

RecoilSensitive wrote:So now you could do this glock 17 with tlr1?

Once I order a g17 mold, absolutely. I haven't forgot about your request, and it planned as my next mold to order.

Matthew 23:12

Post by **ken6881** » Fri Feb 20, 2015 11:44 am

do you think this will work with a 34 in 9mm? its the 5" model

Post by **Bama** » Fri Feb 20, 2015 11:53 am

I honestly do not know. Gen 3 possibly, but I have no way of confirming.

Matthew 23:12

Post by **RecoilSensitive** » Fri Feb 20, 2015 1:52 pm

The glock 17 mold would be closer but i can try to compare them in another holster of mine

Post by **ken6881** » Fri Feb 20, 2015 2:49 pm

let me know recoil I am thinking of getting one of these to shoot in idpa.

Post by **Niceguy** » Fri Feb 20, 2015 3:17 pm

ken6881 wrote:do you think this will work with a 34 in 9mm? its the 5" model

I'll let you know in a few days... Got a holster coming and have a gen3 34.

Post by **ken6881** » Fri Feb 20, 2015 3:17 pm

Thanks Niceguy I appreciate it.

Kentucky Armory Club

G19 IWB

G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Re: G19 IWB

Login • Register