HiperTouch on Board at Stamler Machine
Moderators: adayton, Stamler Machine
-
- Posts: 750
- Joined: Thu Nov 08, 2012 12:40 pm
- Location: Between Cabela's and Crestwood
- Has liked: 0
- Been liked: 0
HiperTouch on Board at Stamler Machine
Just got hooked up with HiperTouch ... You can read about their triggers here:
http://www.hiperfire.com/products/
And here are the KAC member prices with MSRP and MAP prices to compare to...
I won't be stocking at first, but if any one trigger gets 'hot', I may try to keep one or two in stock ...
Thanx,
Allan Dayton
Stamler Machine
502-228-8871 -- Home/Office
502-572-5356 -- Mobile
http://www.hiperfire.com/products/
And here are the KAC member prices with MSRP and MAP prices to compare to...
I won't be stocking at first, but if any one trigger gets 'hot', I may try to keep one or two in stock ...
Thanx,
Allan Dayton
Stamler Machine
502-228-8871 -- Home/Office
502-572-5356 -- Mobile
- Vividia
- KAC Member
- Posts: 1413
- Joined: Sun Mar 04, 2012 11:35 am
- Location: Louisville, KY
- Has liked: 0
- Been liked: 1 time
Re: HiperTouch on Board at Stamler Machine
nice addition Allan. These are terrific triggers in my opinion. And nice prices too
It is hardly too strong to say that the Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters. - Daniel WebsterMexican Kerry wrote:Except for Viv. I predict she will be the leader of a group that roams the countryside pillaging for survival.
- ssracer
- KAC Member
- Posts: 13726
- Joined: Sat Mar 03, 2012 8:24 pm
- Location: KY
- Has liked: 1 time
- Been liked: 58 times
- Contact:
Re: HiperTouch on Board at Stamler Machine
Very nice. I've got to play with one but not shoot with one
-
- Posts: 750
- Joined: Thu Nov 08, 2012 12:40 pm
- Location: Between Cabela's and Crestwood
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
I think I may get a few of the models in and offer the chance for members to 'try before you buy'...
I'll get them in and then figure out details on how we can handle the 'test drives'
Saw it done with Geissele on another forum and looked like a good idea...
I'll get them in and then figure out details on how we can handle the 'test drives'
Saw it done with Geissele on another forum and looked like a good idea...
- Whootsinator
- Little Butthole
- Posts: 3128
- Joined: Sun Mar 04, 2012 2:04 am
- Location: Northern Kentucky
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
How would you say they compare to Geissele? Anyone here shot comparable models from both companies?
"I don't retreat; I kick ass in the other direction."
- son of liberty
- KAC Member
- Posts: 1759
- Joined: Sat Mar 03, 2012 9:22 pm
- Location: Carrollton
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
I would like to try one.adayton wrote:I think I may get a few of the models in and offer the chance for members to 'try before you buy'...
I'll get them in and then figure out details on how we can handle the 'test drives'
Saw it done with Geissele on another forum and looked like a good idea...
I tested out the Geissele SD3G last week and was completely disappointed
-
- Posts: 750
- Joined: Thu Nov 08, 2012 12:40 pm
- Location: Between Cabela's and Crestwood
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
I have never tried either....at this point.Whootsinator wrote:How would you say they compare to Geissele? Anyone here shot comparable models from both companies?
I am going to procure both brands now and have them available for testing.
I'll keep you all updated here...
Thanx for the input DBH and SOL
- Vividia
- KAC Member
- Posts: 1413
- Joined: Sun Mar 04, 2012 11:35 am
- Location: Louisville, KY
- Has liked: 0
- Been liked: 1 time
Re: HiperTouch on Board at Stamler Machine
I have the Geissele SSA in my carbine and hiperfire in my 20 inch heavy barrel. I like them both a lot and won't swap out the Geissele. The hiperfire is terrific for precise work. Very crisp and clean break.
It is hardly too strong to say that the Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters. - Daniel WebsterMexican Kerry wrote:Except for Viv. I predict she will be the leader of a group that roams the countryside pillaging for survival.
- Wyldman
- KAC Member
- Posts: 6984
- Joined: Sat Mar 03, 2012 8:01 pm
- Location: Spring, TX
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
I'd be interested in trying the EDT (the only one I can afford, right now) on my .300BLK, looking for a fast, clean, mid-weight pull, single stage trigger. Does anyone have one I could look at?
IN GOD WE TRUST
"That boy's paradigm don't always add up to four nickels...."
"That boy's paradigm don't always add up to four nickels...."
-
- Posts: 750
- Joined: Thu Nov 08, 2012 12:40 pm
- Location: Between Cabela's and Crestwood
- Has liked: 0
- Been liked: 0
Re: HiperTouch on Board at Stamler Machine
I now have the Hiperfire EDT... The Hiperfire 24 ... and the Hiperfire 24E in stock ...
I will definitely do what I mentioned earlier in my post so you have a chance to try one out ...
What I would ask is that you stop by with your rifle and I will install the FCG and allow you a week to try it out ... then let me know whether you would like to keep it or not ... if not, I would have you once again stop by and I will deinstall it ... If you decide to keep it, Just pay me for it ...
We will see how that works and make changes as they are needed ...
Please PM me with your requests ...
It looks like I can get these things in stock within just a few days as they are located in Minnesota ... Just to give you an example, I ordered over the weekend and they appeared in my mailbox today ...
Thanx,
Allan
I will definitely do what I mentioned earlier in my post so you have a chance to try one out ...
What I would ask is that you stop by with your rifle and I will install the FCG and allow you a week to try it out ... then let me know whether you would like to keep it or not ... if not, I would have you once again stop by and I will deinstall it ... If you decide to keep it, Just pay me for it ...
We will see how that works and make changes as they are needed ...
Please PM me with your requests ...
It looks like I can get these things in stock within just a few days as they are located in Minnesota ... Just to give you an example, I ordered over the weekend and they appeared in my mailbox today ...
Thanx,
Allan